Tips For Replacing Your Brake Pads

As a general rule of thumb, you’re supposed to have your brakes replaced every 80,000 kilometers or so, to make sure that you don’t run into any trouble on the road. However, depending on certain factors, the frequency of replacement can vary.

Factors To Take Into Account

  • Your driving style – if you’re the kind of driver that tends to stomp on the brake pedal often instead of pressing on it gently, you’ll definitely wear off your pads much quicker.
  • Traffic – If you tend to get stuck in traffic a lot then the amount of times you use the brake pedal is very high. This adds up, resulting in your brake pads wearing off at a faster rate.
  • The pad’s material – For instance carbon-ceramic pads are much more durable than your standard metal ones, meaning they’ll last longer. However the former is much more expensive than the latter.

How To Tell If They Need Replacing

How do you know if your pads need to be replaced? One typical telling sign is high-pitched screeching or squealing noises every time you brake. If you’re not sure about the status of your brake pads, contact the best automotive mechanic Perth for an in-depth analysis. If you’re wondering whether you could replace your brake pads on your own, the answer is yes. All you have to do is adhere to these best practices and tips:

Get The Proper Brake Pads

You’ll want to get pads that are appropriate for the make and model of your car. If you’re not sure, it’s always best to consult an expert. While a good set of brake pads can be quite expensive, you’ll end up saving money in the long-term because they’ll most likely last longer.

Let The Old Pads Cool First

Do not attempt to replace your brake pads just after a drive. This is because the pads might still be heated after your driving session and if you attempt to touch them, you may very well end up with burnt fingertips. Therefore, we recommend that you allow the pads to cool down first.

Follow The Proper Tyre Removal Procedure

You should definitely read the official manual for your car because the manufacturer is very likely to have listed specific instructions for removing tyres. For example, the manual may specify an exact car jack position.

Use WD-40 When Removing Calipher Bolts

In addition to using the appropriate socket, you’ll definitely want to lubricate the calipher bolts to facilitate their removal. This will help you save a lot of time.

Inspect Brake Rotors

After you’ve taken out the old brake pads, you should also examine the brake rotors as well. If they appear to be damaged, we recommend that you have them replaced too.

Use Anti-Seize Lubricant

Using anti-seize lubricant strictly on the exterior of the brake pads can help get rid of the squeaking. Take care not to apply any on the interior as it prevents the brakes from functioning properly.

If you ever find yourself stuck and unable to complete the process, there’s no shame in consulting with an expert. It definitely takes a bit of practice and time to get used to.

Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *